Product information


Subli-Print® Key Ring Alu

The Subli-Print® aluminium sublimation pendants are made of approximately 0,8 mm thick aluminium with a white sublimation coating and a very subtle glitter effect.

The Subli-Print® sublimation pendants can be printed on both sides. Both sides are covered with a protective film that must be removed before transfer. Supplied with key ring and clip.

  • Circle approx. 50 mm diameter
  • Square approx. 50 x 50 mm
  • Rectangle approx. 35 x 80 mm
  • Heart approx. 50 x 50 mm
  • Key approx. 35 x 90 mm


The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.

Mirror subject Yes
Pressing temperature 180 °C
Pressing time 45 seconds
Contact pressure Medium, 2,5 - 3,0 Bar

Always carry out application tests on the original material.