Subli-Print® Thermo-Tumbler Maxi with Straw
Double walled stainless steel skinny tumbler
-
Each tumbler is individually packed in a transport box
-
Tested for harmful substances by TÜV Rheinland § 31 LFGB
-
Suitable for contact with food
Product information
Sublimation Thermo-Tumbler: Subli-Print® Stainless Steel Maxi Tumbler with Straw (20 oz)
The Subli-Print® Stainless Steel Maxi Thermo-Tumbler is a large, double-walled sublimation tumbler with a lid and closable drinking spout.
A matching stainless steel straw is included.
- Capacity: approx. 590 ml
- Diameter: approx. 74 mm
- Height: approx. 215 mm
- Recommended cleaning: hand wash only
Enjoy a Personalised Experience with a Sublimation Thermo-Tumbler
Add a personal touch to your tea or coffee moments with a sublimation thermo-tumbler from Subli-Print®. Ideal for everyday use, at work or on the go.
Create Your Own Unique Design
Whether it’s your favourite artwork, an inspiring quote or a cherished photo – customise your tumbler and make it truly unique.
High-Quality Insulation for Hot and Cold Drinks
The double-walled stainless steel construction keeps beverages hot or cold for extended periods. Made from durable, toxin-free materials for safe sipping.
Sublimation Thermo-Tumbler – A Unique Gift Idea
A sublimation thermo-tumbler makes the perfect creative and personalised gift – or a stylish addition to your daily routine.
Start Now and Design Your Own Subli-Print® Thermo-Tumbler
Take advantage of sublimation printing and design your own stainless steel thermo-tumbler – exclusively available from foil direct.
Instructions
The following information is intended as a guide and may vary due to tolerances (material properties, sublimation inks and paper, substrate and ambient temperature, etc.). We recommend storing the items to be sublimated at room temperature for at least 24 hours before processing.
| Mirror subject | Yes |
|---|---|
| Pressing temperature | 180 °C |
| Pressing time | 60 + 40 seconds |
| Contact pressure | Medium, 2,5 - 3,5 Bar |
| Notice | Rotate after 60 seconds and press for a further 40 seconds |
Always carry out application tests on the original material.